Motorcycle Industry

Get high-quality manufacturing services for your custom motorcycle prototypes and production parts. Our high-yield, efficient processing technology creates every motorcycle part for you.

  • Market-oriented, a wide range of applications.

  • IS09001:2015,1S014001:2015 and IATF16949:2016 certified.

  • 24/7 engineering support.

Materials for Motorcycle Components

Depending on your requirements for motorcycle parts, our sophisticated processing technology meets the processing needs of a wide range of material.Here are some commonly used materials for our motorcycle parts.

Aluminum

Aluminum has a high strength and weight ratio, which helps to reduce the launch weight of the spacecraft and improve the carrying capacity and fuel efficiency. Because aluminum has excellent thermal conductivity, it can effectively reduce the temperature rise during engine operation and ensure efficient and stable operation of the engine.

Brass

Brass

Brass has good electrical conductivity and machinability, and can be used as wires and leads in electronic components and circuit boards. In addition, brass can also be used to make contacts, relays.

Stainless Steel

Stainless Steel

Stainless steel grates offer key advantages in the design of spacebase walking platforms, including corrosion resistance and high temperature resistance.

Steel

Steel

Steel grates offer key advantages in the design of spacebase walking platforms, including corrosion resistance and high temperature resistance.

Bronze

Bronze

Bronze is an alloy composed of copper and tin. Because of its good electrical conductivity, but also has excellent corrosion resistance; Therefore, it is widely used in the manufacture of appliances, such as telephones, alarm clocks and television sets.

3

Copper

Because of its good ductility, high thermal and electrical conductivity, it is used in the manufacture of engine parts, braking systems, electrical systems and radiators.

Titanium

Titanium alloy has good plasticity and weldability, and can be manufactured in various shapes of parts. In aviation parts manufacturing, titanium alloy is widely used in the manufacture of various complex parts, such as aircraft engine impellers, turbine disks, ground equipment and so on.

Magnesium

Magnesium

It has the advantages of high specific strength and stiffness, good damping and machinability, and easy recovery. Magnesium alloy is applied in automobile industry at home and abroad to reduce weight, energy saving and pollution. Lightweight components for manufacturing cars, motorcycles, bicycles, etc.

Plastic

The processing materials include ABC、PC、PMMA、POM、PA、PE、PEEK、PP、HDPE、HIPS、LDPE、PBT、PPA、PAI、PET、PPS、PS and so on.

Surface Finishing for Motorcycle Parts

High quality surface treatment can better fit your product, improve corrosion resistance and product beauty, so that your product life can extend, we can provide suitable surface treatment according to your product characteristics.

Name Description Materials Color Texture Link
AnodizingIt is a material protection technology that forms an oxide film on the surface of metal materials in electrolyte solution by applying anode current;The film generated by it changes the state and properties of the surface of aluminum and its alloys, such as surface color, improve corrosion resistance, wear resistance and surface hardness.Aluminum Aluminium alloyClear, black, grey Red Blue gold.Smooth,matteLearn More>>
PolishingIt is used to improve the corrosion resistance , sulfur resistance and painting properties of metal products, and to prevent the growth of tin oxides during storage and sulfide rust in the process of tin plate canning.Aluminum, Stainless Steel Steeln/aGloss or semi-glossLearn More>>
ElectroplatingIt is mainly used on the metal surface to provide a protective film for the metal surface to isolate the metal from the air and prevent it from being corroded; It will also be used for the primer of some products before painting, with this layer of phosphating film can improve the adhesion andcorrosion resistance of the paint layer, improve the decoration, and also play a lubricating role in the cold processing of some metals.Steel, Stainless Steel Brassn/aSmooth,glossy finishLearn More>>
Powder CoatingIt refers to a chemical heat treatment process in which nitrogen atoms penetrate into the surface of the workpiece in a certain medium at a certain temperature. The nitrided products have excellent wear resistance Fatigue resistance, corrosion resistance and high temperature resistance.Steel aluminum alloyBlack WhiteSmooth, matteLearn More>>
PaintingCar painting refers to a layer of paint on the surface of the car to achieve the effect of protecting the car. Automobile factory, paint the frame and shell after welding. Painting process: scraping putty, grinding, painting, etc.Steel AluminumWhite BlackSmooth glossy finish MatteLearn More>>
Nickel PlatingNickel plating refers to the coating of a layer of nickel on the surface of a metal to improve its wear resistance, corrosion resistance and aesthetics. The nickel layer has good chemical stability and high hardness.steel copper Brasssilver gray BlackSmoothLearn More>>
Zinc PlatingIt refers to plating a layer of zinc on the surface of the body to play a beautiful role in rust prevention; In addition, the surface of the zinc oxide layer is difficult to dissolve in water, so it has a certain protective effect on the steel fastener matrix to achieve a beautiful effect.Steel Stainless steelWhite Blue Black Yellow GreenGlossyLearn More>>
Zinc Nickel PlatingZinc nickel plating is a polished surface treatment method, which is covered with a layer of alloy composed of zinc, nickel and other metals (such as copper) elements on the surface, so as to obtain a surface with corrosion resistance, excellent friction resistance and reaction performance, non-toxic and harmless, environmentally friendly, unchangeable color, beautiful and elegant, it can resist corrosion, vibration, temperature change and withstand voltages and electric currents.Steel Alloy steelSilver Black BlueMatte GlossyLearn More>>

Motorcycle  Applications

Motorcycle  Application

We improve the production rate of a wide range of motorcycle components. Common motorcycle applications we undertake include:

  • Motorcycle spare parts

  • Motorcycle trunk

  • Support for vehicular consumer electronics

  • Lighting features

  • Plastic dash components

  • Engine cylinder

  • Trademark

  • Aftermarket parts

Custom Parts for Motorcycle Industry

Our products are 100% original, quality assurance. Whether it is to enhance the performance of the car or ensure safe driving, it can meet your needs. The following products show precision machined vehicle prototypes and production parts.

Hot Search Terms
SEO Company Singapore
Hot Search Terms
Hot Search Terms